Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Mountain View, CA
Chimney repair in Mountain View tends to follow a distinct pattern. We’re called out to 1950s and 1960s ranch homes, usually around 94040, 94041, and 94043, where the original clay tile flue has quietly cracked after fifty or sixty years of heating and cooling cycles. The repairs we do require more than a quick patch. We inspect the flue with a camera, show you the evidence, and only recommend work your chimney actually needs. Call (833) 593-7116 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Mountain View Homes Are Different
Most Mountain View chimney work happens inside post-war ranch houses and Eichler-style homes built between the mid-1950s and early 1970s. Those houses came with real masonry fireplaces and clay tile liners that were designed for occasional winter burns. The climate changed how they were used. Mild, dry summers and cool-but-not-frigid winters mean fireplaces now run lightly but regularly, often as background ambiance rather than a primary heat source. Because creosote builds slowly in that pattern, service gets deferred. We regularly step into Mountain View chimneys that have never been inspected, not once, in fifty years of use.
The older stock near downtown, especially in 94041 and along the 94040 and 94043 borders, is where we find the most deferred maintenance. Meanwhile, the newer townhome construction along the 94043 corridor often uses factory-built fireplaces with different flue geometry and different sweeping requirements. That split matters. A masonry chimney from 1962 and a factory-built fireplace from 2008 need different tools, different inspection points, and different repair approaches. Tech-worker households near downtown and toward 94043 frequently skip annual service for years, which is why our first visit so often begins with a camera inspection and ends with a straightforward explanation of what actually needs attention and what can safely wait.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Mountain View Services
Two services drive most of our Mountain View calls: chimney sweeping for masonry and factory-built fireplaces, and dryer vent cleaning for the gas dryers in older laundry rooms. Each has its own page where we go deeper on local conditions and pricing.
Chimney Sweep in Mountain View
A Chimney Sweep in Mountain View typically starts with checking the flue for blockages before any brushing begins. In this area, we’re looking for leaf litter, pest nests, and the slow creosote accumulation that comes from light but steady fireplace use. The job finishes with a camera inspection and a photo report, so you can see exactly what we saw. Summer is the practical sweep window here, before the first cool evenings send everyone back to the fireplace.
Dryer Vent Cleaning in Mountain View
Dryer Vent Cleaning in Mountain View addresses a hidden fire source that most homeowners overlook. Older ranch homes often have long, narrow dryer vent runs with multiple bends, and lint builds up exactly where airflow is weakest. We clean the full run, confirm the exterior vent opens properly, and check for the kind of blockage that makes the dryer run hotter and longer than it should.
Chimney Repair in Mountain View
Chimney repair in Mountain View is shaped by the age of the housing stock. The original clay flue liners in post-war ranch homes crack from decades of thermal cycling, and water works its way into the mortar joints every winter. We handle Chimney Repair in-house, from crowns and caps to full liner restoration, so you’re not handed off to a separate mason after the inspection. Everything we recommend is backed by camera evidence you can see for yourself.
Chimney Cap Installation
Signs you need it
You can see daylight from the firebox when you look up the flue, or you’ve found leaves, twigs, and pest droppings in the firebox after the rainy season.
What it costs in Mountain View
Chimney cap installation in Mountain View typically runs $175 to $350 depending on the flue size and cap material.
How we do it
We measure the flue opening, select a properly sized cap, secure it to the crown with stainless hardware, and confirm the spark arrestor mesh is seated correctly.
Chimney Liner Installation
Signs you need it
Your camera inspection shows cracked or missing clay tile sections, or the flue fails a basic smoke test because gases are leaking into the chimney cavity.
What it costs in Mountain View
Chimney liner installation in Mountain View typically falls between $2,500 and $5,000, with the final price set by flue length, geometry, and liner type.
How we do it
We size the liner to the actual flue dimensions, account for any offsets in the chimney run, lower the liner into place, and insulate or seal the connection as the installation requires.
Chimney Flashing Repair
Signs you need it
You’ve noticed water staining on the ceiling near the chimney, or the flashing metal is visibly lifting, rusted, or pulling away from the roofline.
What it costs in Mountain View
Chimney flashing repair in Mountain View typically costs $300 to $850, depending on how much of the flashing is compromised.
How we do it
We inspect the flashing where the chimney meets the roof, remove and replace damaged sections, and re-seal the joints so water can’t work its way into the chase.
Chimney Crown Repair
Signs you need it
The crown is visibly cracked, crumbling, or spalling, and water has begun pooling on top of the chimney instead of running off.
What it costs in Mountain View
Chimney crown repair in Mountain View typically runs $300 to $950, depending on the size of the crown and the condition of the masonry below it.
How we do it
We clean the existing crown, repair or repour the cement surface, and make sure the new crown slopes away from the flue and overhangs the chimney edge properly.
What Chimney Repair Costs in Mountain View
| Item | Typical range in Mountain View |
|---|---|
| Chimney cap installation | $175 – $350 |
| Chimney flashing repair | $300 – $850 |
| Chimney crown repair | $300 – $950 |
| Chimney liner installation | $2,500 – $5,000 |
These are typical estimates, not quotes. The written estimate we give you after inspection sets the final price, and you’ll always see the camera evidence before any repair is recommended.
Do I really need a new chimney liner?
If the camera inspection shows cracked clay tiles or gaps between tile sections, the liner is no longer containing flue gases. The fix can be a full liner installation or a HeatShield resurfacing, depending on what the flue geometry allows. Call (833) 593-7116 and we’ll show you the footage.
How often should a Mountain View chimney be repaired or at least inspected?
Most manufacturers and fire-safety organizations recommend an annual inspection, even if the fireplace gets light use. In Mountain View specifically, deferred service is common, so if you haven’t had the flue looked at in years, that first inspection is the most important one. Estimates are free.
Brands We Service in Mountain View
We build with professional-grade materials from Olympia Chimney, Famco, and Copperfield, plus DuraFlex liners when the flue geometry calls for a flexible system. These are the materials specified on real chimney engineering drawings, not off-the-shelf substitutes. Most common parts are stocked locally, which keeps repair turnaround short in Mountain View. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Mountain View, CA
| Service | Typical range in Mountain View |
|---|---|
| Chimney sweep (standard masonry fireplace) | $149 – $275 |
| Chimney sweep (factory-built fireplace) | $180 – $300 |
| Dryer vent cleaning | $95 – $165 |
| Chimney cap installation | $175 – $350 |
| Chimney cap replacement | $200 – $375 |
| Chimney flashing repair | $300 – $850 |
| Chimney crown repair | $300 – $950 |
| Chimney liner installation | $2,500 – $5,000 |
| HeatShield flue resurfacing | $1,800 – $3,500 |
| Chimney inspection with camera report | $0 with any service |
What pushes a Mountain View job higher is usually the age of the original masonry and the condition of the flue after decades of intermittent use. The written estimate we give you before work starts is the price, no surprises after the fact.
Neighborhoods We Serve in Mountain View
We cover all of Mountain View, from the older ranch neighborhoods near downtown to the townhome corridors along the 94043 side of the city. Most of our Mountain View appointments are scheduled within a few days, and we stock the common replacement parts for these older chimneys on the truck so the first visit is usually the only visit.
- Waverly Park
- Blossom Valley
- Cuesta Park
- Old Mountain View
- Rex Manor / Monta Loma
Service Area – Cities Near Mountain View
Our Mountain View customers often ask if we cover the surrounding peninsula. We do. You can read more about Los Altos, CA, where the ranch-home stock is similar and the deferred maintenance pattern holds. We also serve Sunnyvale, CA, Cupertino, CA, and Palo Alto, CA. The same crews, the same camera-first inspection, and the same flat-price promise apply across the whole area.
Serving Mountain View, CA – Our Local Coverage Area
We serve Mountain View and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Mountain View
We dispatch from 7am to 7pm, Sunday through Friday, and closed Saturday. Most Mountain View appointments are scheduled within a few days. Call (833) 593-7116 and we’ll get you on the calendar. We answer 24/7, so a call outside dispatch hours is booked into the next opening.
Most chimney repairs like caps, flashing, and crown work don’t usually require a permit, but liner work can trigger one depending on the scope. We’ll tell you plainly if your job needs a permit, and we can guide you through the city’s building department process.
Clay tile liners crack from thermal cycling, not from overuse. Even light, intermittent burning over fifty-plus years expands and contracts the clay enough to create hairline fractures. Most cities and fire-safety standards require a structurally sound liner, so it’s a repair that can’t safely wait forever.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mountain View Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Alejandro Delgado"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Lucia Garcia"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Eric Nguyen