Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Redwood City, CA
Chimney repair in Redwood City usually comes down to two things: water getting into old masonry, and original clay-tile flues reaching the end of their service life. The downtown and Mount Carmel neighborhoods are full of pre-1950s bungalows and Spanish-revival homes whose chimneys were built to last, but not forever. Decades of mild but wet winters leave spalling brick, cracked crowns, and leaky flashing. We handle all of it in-house, from crown and cap work to full liner replacement. Call (833) 593-7116 for a free estimate.
Why Redwood City Homes Are Different
Redwood City’s mild, dry summers and wet winters create a specific maintenance rhythm. Chimneys here are used less for primary heat and more for occasional fires, so creosote builds up slowly, but winter rain finds its way into any small crack in a crown or mortar joint. Water that sits in brick and clay tile causes spalling, the flaking and chipping you see on older facades. In the downtown and Mount Carmel areas, many original brick and clay-tile chimneys have survived since before 1950, which means we work on a lot of original masonry that needs careful hand-sweeping and inspection. After the region’s rare but impactful earthquakes, it’s wise to check for hairline cracking that was not there before.
In ZIP codes 94061 and 94063, older bungalows and Spanish-revival homes often have chimneys retrofitted with spark arrestors to meet local fire codes after historical wildfires. Those arrestors do a needed job, but they also catch creosote and seed debris faster than an open flue. Newer developments in 94065, with factory-built metal fireplaces, have completely different maintenance demands. A metal system needs different tools and a lighter hand than a 1930s clay-tile flue. Because many Redwood City homes have chimneys that see only a few fires a year, birds sometimes build nests in the off-season. A pre-season sweep before the first fire is the simplest way to avoid smoke backing into the house on the first cold, rainy evening.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Redwood City Services
Most Redwood City homeowners call us for one of two reasons: a chimney that has not been swept in years, or a dryer vent that has never been cleaned. Both are fire-risk systems that hide problems until something goes wrong.
Chimney Sweep in Redwood City
A sweep in Redwood City starts with understanding what kind of chimney you actually have. Older masonry chimneys in neighborhoods like Mount Carmel need hand brushing and a close look for spalling and moisture damage, while factory-built metal fireplaces in newer 94065 homes need a gentler approach and a different set of tools. We inspect before we sweep, showing you what we find before recommending anything beyond the cleaning itself. One call covers the sweep and the inspection. Chimney Sweep in Redwood City walks through the process and typical pricing.

Dryer Vent Cleaning in Redwood City
Dryer vents are easy to ignore because they fail slowly. A vent that is partially blocked makes the dryer work harder, clothes take longer to dry, and lint accumulates against a hot exhaust. In Redwood City homes where the dryer lives close to the chimney, we can often handle both systems in one appointment. That keeps two of the most common residential fire sources under control without scheduling a second contractor. Dryer Vent Cleaning in Redwood City explains what is involved and what it costs.

Chimney Repair in Redwood City
Chimney repair in Redwood City often means restoring an original clay-tile flue in a pre-1950s bungalow or Spanish-revival home. Mild winters mean chimneys are used less for heat, but winter rain still finds its way through cracked crowns and worn flashing, and the wet-dry cycle slowly breaks down brick and mortar. We inspect, explain what we find, then repair, whether that means resurfacing a flue, replacing a cap, or rebuilding a crown.
Chimney Cap Installation
Signs you need it
Water stains on the interior ceiling near the chimney, rust on the damper, or the sound of birds in the flue.
What it costs in Redwood City
A new chimney cap in Redwood City typically runs $250 to $700 installed, depending on the flue size and cap material.
How we do it
We measure the flue, inspect the surrounding crown, and install a properly sized cap that stops rain, birds, and spark emission.
Chimney Cap Replacement
Signs you need it
A cap that is rusted through, lifted off by wind, or too damaged to stop rain and animals from getting in.
What it costs in Redwood City
Replacing a chimney cap in Redwood City generally costs between $300 and $800, including removal and disposal of the old one.
How we do it
We remove the old cap, check the flue for hidden damage, and install a new cap that fits the crown and flue correctly.
Chimney Liner Installation
Signs you need it
Gaps or cracks in the flue, pieces of clay tile in the firebox, or smoke and odor seeping into rooms above the fireplace.
What it costs in Redwood City
Chimney liner installation in Redwood City typically runs $3,000 to $6,500, depending on the flue shape and accessories.
How we do it
We size the liner to the flue’s actual geometry, often using a DuraFlex flexible system when offsets make a rigid liner impractical.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, dampness on the attic side of the chimney, or visible gaps and pulled-away flashing.
What it costs in Redwood City
Flashing repair in Redwood City typically costs $400 to $1,200, based on how much of the existing flashing can be salvaged.
How we do it
We check the seal where the chimney meets the roof, repair or replace the flashing, and secure it so winter rain stops getting in.
Chimney Crown Repair
Signs you need it
Cracks across the crown surface, pieces of mortar missing, or a crown that looks pitted and worn past a hairline.
What it costs in Redwood City
Crown repair in Redwood City usually falls between $800 and $1,800, depending on crown size and extent of the cracking.
How we do it
We patch small cracks or rebuild the crown when it is too far gone, sloping it properly so water sheds away from the flue.
What Chimney Repair Costs in Redwood City
| Item | Typical range in Redwood City |
|---|---|
| Chimney cap installation | $250 – $700 |
| Chimney cap replacement | $300 – $800 |
| Chimney liner installation | $3,000 – $6,500 |
| Chimney flashing repair | $400 – $1,200 |
| Chimney crown repair | $800 – $1,800 |
How much does chimney repair cost in Redwood City?
Most chimney repairs in Redwood City run between $250 and $6,500, depending on the part. Caps and flashing sit at the lower end, liners at the upper. Your written estimate sets the exact price. Call (833) 593-7116 for a free estimate and we will show you what the chimney actually needs.
Do I really need a new liner, or can mine be restored?
Not every damaged liner needs replacement. We use HeatShield flue resurfacing when the clay tiles are cracked but the structure is sound, restoring the flue at a lower cost than a full reline. We only recommend replacement when the flue can’t be saved. Call (833) 593-7116 to have us take a look.
Brands We Service in Redwood City
We work with professional-grade materials from Olympia Chimney, Famco, Copperfield, and DuraFlex, the same components specified by certified chimney engineers. We stock common caps, flashing, and liner parts locally, so most repairs in Redwood City can be finished without waiting on a special order. Read more on our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Redwood City, CA
| Service | Typical range in Redwood City |
|---|---|
| Chimney sweep | $180 – $340 |
| Dryer vent cleaning | $130 – $260 |
| Chimney cap installation | $250 – $700 |
| Chimney cap replacement | $300 – $800 |
| Chimney liner installation | $3,000 – $6,500 |
| Chimney flashing repair | $400 – $1,200 |
| Chimney crown repair | $800 – $1,800 |
Older masonry chimneys in Redwood City tend to push costs higher than newer factory-built systems because the work requires more labor and care. Whatever the number, the written estimate we give you before we start is the price for the job, with no surprises added after the fact.
Neighborhoods We Serve in Redwood City
We work all over Redwood City, from the older blocks downtown to the newer developments on the west side. Dispatch runs Sunday through Friday, 7am to 7pm, and callers reach us 24/7.
- Mount Carmel
- Downtown Redwood City
- Redwood Shores
- Woodside Plaza
- Roosevelt
Service Area – Cities Near Redwood City
Beyond Redwood City, our service area covers the neighboring Peninsula communities. We work in Palo Alto, CA, Los Altos, CA, Mountain View, CA, and Newark, CA. If you are nearby, call (833) 593-7116 to confirm coverage.
Serving Redwood City, CA – Our Local Coverage Area
We serve Redwood City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Redwood City
Most basic repairs like caps, flashing, and crowns do not need a permit, but a full liner replacement or significant masonry rebuild may. We can tell you what your specific job requires and handle it accordingly. Call (833) 593-7116 and we will explain what applies.
We answer the phone 24/7 and dispatch crews Sunday through Friday from 7am to 7pm. Redwood City jobs are usually scheduled within a few days, and we work with you on the time. Same-day service is often available.
Do not try to smoke it out or remove it yourself. A nest can conceal a blocked flue or damaged liner. We remove nests during a sweep and can install a cap that keeps birds out for good. Call (833) 593-7116 to schedule a look.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redwood City Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Lucia Garcia"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Eric Nguyen"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Andre Boyd